| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year Warranty |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specifications and models | LC30-750-180 | LC15-1500-60 | LC20-1500-60 | LC30-1500-60 | LC15-2000-60 | LC20-2000-60 | LC30-2000-60 |
| Output voltage | 750 | 1500V | 2000V | ||||
| Output current | ±180A | ±60A | |||||
| Output power | ±30kW | ±15kW | ±20kW | ±30kW | ±15kW | ±20kW | ±30kW |
| Energy feedback | Supports energy feedback | ||||||
| Isolation function | Inputs and outputs are galvanically isolated | ||||||
| AC characteristics | |||||||
| Rated voltage | 400Vac | ||||||
| Voltage range | 360Vac~440Vac | ||||||
| Rated frequency | 50Hz/60Hz | ||||||
| Frequency range | 47Hz~63Hz | ||||||
| Wiring | Three-phase three-wire+PE | ||||||
| DC voltage\current | |||||||
| Voltage regulation range | 0~750Vdc | 0~1500Vdc | 0~2000Vdc | ||||
| Voltage setting accuracy | ≤0.02%FS | ||||||
| Voltage setting resolution | 0.01V | ||||||
| Voltage display accuracy | ≤0.02%FS | ||||||
| Voltage display resolution | 0.01V | ||||||
| Voltage source regulation | 0.01%FS | ||||||
| Voltage load regulation | 0.01%FS | ||||||
| Distal compensation | ≤40V | ||||||
| Voltage ripple(20Hz-20MHz) | <2400mVpp/RMS400mV | ||||||
| Current regulation range | -180A~180A | -60A~60A | |||||
| Current setting accuracy | ≤0.02%FS | ||||||
| Current setting resolution | 0.01A | ||||||
| Current display accuracy | ≤0.02%FS | ||||||
| Current display resolution | 0.001A | ||||||
| Current rise time | 300us(10%~90%) | ||||||
| Current switching time | 1.5ms(-90%~90%)switch | ||||||
| Battery simulation function | |||||||
| Battery type | It can simulate different battery types such as lithium iron phosphate, ternary lithium, and lead-acid batteries | ||||||
| Set the parameters | Parameters such as battery type, series, number of parallels, SOC, cell capacity, etc | ||||||
| Display parameters | Real-time SOC curve, current capacity, current power, cumulative charge/discharge energy, cumulative charge/discharge energy, running time and other parameters | ||||||
| IV curve simulation function | |||||||
| Open circuit voltage range | 10~750V | 10~1500V | 10~2000V | ||||
| Short-circuit current setting | 0A~180A | 0A~60A | |||||
| Type of photovoltaic panel | CSi,TF,SCMC,HEC,Customize | ||||||
| Fill factor | 0.25~0.95 | ||||||
| IV curve function | PV scanning, tracking efficiency test, PV curve (including multi-peak) generation, dynamic and static MPPT test, shadow occlusion, cloud drift | ||||||
| Support standards | EN50530,Sandia,NB/T 32004,CGC/GF035,CGC/GF004 | ||||||
| Programming features | |||||||
| Number of programming groups | 30 groups | ||||||
| The number of programming steps | 300 steps | ||||||
| Programmatically | Through the number of steps, the number of cycles, the execution mode, the step jump, etc., it can be combined into a multi-sequence complex output mode to meet the test of complex working conditions, and can be applied to the programming test of voltage, current, power and other parameters |
||||||
| Trigger mode | Manual trigger, delayed trigger | ||||||
| Other parameters | |||||||
| Working mode | Constant voltage, constant current, constant power, constant resistance, support programming, battery simulation, IV curve ,can be set | ||||||
| efficiency | ~95% | ||||||
| Factor | 0.99 | ||||||
| harmonic wave thd | ≤3% | ||||||
| Protection features | Over-voltage, over-current, under-voltage, over-temperature, fan failure, etc | ||||||
| Communication interface | USB,RS485,CAN,LAN,DB-26 | ||||||
| Control mode | Touch screen, host computer | ||||||
| Heat dissipation | Forced air cooling | ||||||
| Operating temperature | -10ºC~50ºC(Derating above 40°C) | ||||||
| Storage temperature | -20ºC~70ºC | ||||||
| relative humidity | ≤80%(No condensation) | ||||||
| Structural dimensions(W*H*D) | 440mm*132mm*671.5mm | ||||||
| weight | 35KG | ||||||
| elevation | ≤2000m | ||||||
BlueSight Power Supply Ltd. (hereinafter: "Bluesight") was established in 2022, with its headquarters located in Hefei, Anhui Province. It is an international testing power supply technology company that integrates R&D, manufacturing, sales, and service, providing competitive testing products and system solutions for industries.
With a high-level, specialized technical R&D team, Bluesight produces DC and AC power supply testing equipment, fuel cell discharge systems, and ATE automated testing system solutions through independent research and development and technological innovation. These are widely applied in industries such as photovoltaic inverters, energy storage converters, electric vehicles, fuel cells, and charging station.
Bluesight always adheres to the philosophy of 'innovation-driven and customer first,' striving to become a leading global supplier of power supply testing systems, making testing more precise, intelligent, user-friendly!
APPLICATION CASE
){kind=link}